一 Catheter-over-needle NCD · 14G × 8 cm
Chest Decompression Needle — 14G × 8 cm for Tension Pneumothorax
A tension pneumothorax can turn survivable trauma into a cardiac arrest in minutes. This is the field tool that buys those minutes back — a large-bore catheter-over-needle that vents trapped pleural air long enough to move the casualty to definitive care.
We manufacture one focused needle chest decompression (NCD) device: 14 gauge × 3.25 in (8 cm), supplied with its own protective carry case. One product, built to one job, made for buyers who stock trauma kits at scale.
3.25 in usable length

Over 10 years
Producing tactical-medical disposables
14G × 8 cm
TCCC-aligned length & bore
40 Markets
Export markets · MENA / SEA / LATAM
ISO 13485
CE (MDR) · FDA-registered facility
50,000 units/month
Production capacity
01 · The job & the failure mode
What a Chest Decompression Needle Does — and the Failure Mode Buyers Miss
The job is simple; the failure modes are not. When pleural pressure climbs faster than the body can compensate, the needle is inserted at the approved site to release that pressure. The needle is then withdrawn — and the catheter stays in the chest as the venting channel.
The Catheter-Survival Gap
A needle that decompresses once ≠ a catheter that keeps venting
That last part is where cheap NCD devices fail. If the catheter kinks, buckles on a thick chest wall, or dislodges after the needle comes out, the pneumothorax reoccludes and the field gain is lost. Documented NCD failures cluster around three variables—these are exactly the three lines a serious buyer should check on any spec sheet, ours included.
This page covers selection, specs, applications, and sourcing. For the clinical insertion procedure and the needle-vs-chest-tube decision, see our field guide (coming soon).
14G bore
Large-enough lumen to vent air without the catheter collapsing under negative pressure.
8 cm length
Reaches the pleural space through a thicker-than-average adult chest wall.
Needle + case
Catheter-over-needle, one-piece deployment, protected in transit and in the kit.
02 · Gauge & length
Find the Right Configuration
Pick the needle by chest-wall reach and venting bore, not by price alone. Most tactical and EMS programs standardize on a 14G × 8 cm device because it matches the reach and flow that field guidance (TCCC / ATLS-style protocols) describes for adult casualties.
| Configuration | Bore | Usable length | Typical program |
|---|---|---|---|
| Standard adult (our product) | 14G | 3.25 in / 8 cm | Tactical, military, EMS adult NCD |
| 10G heavy-bore | 10G | 3.25 in / 8 cm | Maximum-flow programs custom—we currently produce 14G only |
| Pediatric / short | smaller bore | shorter | Pediatric protocols inquire—not in our current line |
03 · Technical data
Specifications
Confirm every line against the current spec sheet before you place an order. Values marked pending are awaiting final datasheet confirmation — not marketing rounding.

| Parameter | Value | Source / note |
|---|---|---|
| Device type | Catheter-over-needle, NCD | — |
| Needle gauge | 14G | Confirmed |
| Catheter material | 3.25 in / 8 cm | Confirmed |
| Catheter material | FEP or PTFE | datasheet |
| Flutter / one-way valve | with | datasheet |
| Sterile / non-sterile | Sterilized | datasheet |
| Single-use | Yes | datasheet |
| Shelf life | 3 | datasheet |
| Packaging | Individual + protective case | Confirmed |
| Lot / batch traceability | coding scheme | QC |
| Storage conditions | temp / humidity | datasheet |
04 · Buyer types
Industries & Applications
The same 14G × 8 cm needle serves several buyer types — what changes is the volume and the documentation they need.
Common challenges & how we address them
| Buyer challenge | What we do |
|---|---|
| Catheter re-occlusion after needle removal | 14G bore + 8 cm length spec’d to the documented failure variables (the Catheter-Survival Gap) |
| Inconsistent batch quality across orders | Lot/batch traceability + per-batch QC under an ISO 13485 system |
| Tender rejected on documentation | Export pack: COA, certificate of origin, commercial invoice, HS code support |
| Need to build a branded NCD kit | OEM / private-label on packaging and case |
05 · Quality & safety
Certifications, Quality & Safety
We list only the certifications we actually hold — with numbers confirmed before publication — and we’re explicit about what we do not claim.
Quality system & device status
- Per-batch QC and outgoing inspection under the ISO 13485 system
- Lot / batch traceability
- Export pack: COA, certificate of origin, commercial invoice, HS code support
05 · Quality & safety






